[eSlack] posible error con X11

[Agus Chiappe]

Pues a mí me pasa lo mismo con el mismo driver sin tener instalado
ningún gestor de login para el inicio, si no que ejecutando desde la
consola xinit. Este y mi xorg.conf la única diferencia importante que
tiene con el de él es que el teclado es español en vez de latino.

2008/6/7 Nach0 <guidoignacio en gmail.com>:
> Sino inicias con init 4 sin en 3...cuando queres entrar a las X entras?
>
>
>
> On Sat, Jun 7, 2008 at 11:33 AM, Christian Alegria <zero.cold05 en gmail.com>
> wrote:
>>
>> Saludos listeros:
>>
>> Disculpen, pero aca va una duda de novato...., de vez en cuando estoy
>> teniendo problemas con la pc, ya que antes de que despliegue "gdm", se
>> me congela la pantalla y el teclado y no me deja hacer nada... solo
>> "reiniciar"; cada vez se esta volviendo más frecuente esto...
>>
>> inicio con init 4
>> y adjunto el xorg.conf
>>
>> ##################################################################################
>> Section "ServerLayout"
>>        Identifier     "X.org Configured"
>>        Screen      0  "Screen0" 0 0
>>        InputDevice    "Mouse0" "CorePointer"
>>        InputDevice    "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "Files"
>>        RgbPath      "/usr/share/X11/rgb"
>>        ModulePath   "/usr/lib/xorg/modules"
>>        FontPath     "/usr/share/fonts/TTF"
>>        FontPath     "/usr/share/fonts/OTF"
>>        FontPath     "/usr/share/fonts/Type1"
>>        FontPath     "/usr/share/fonts/misc"
>>        FontPath     "/usr/share/fonts/75dpi/:unscaled"
>> EndSection
>>
>> Section "Module"
>>        Load  "dri"
>>        Load  "xtrap"
>>        Load  "GLcore"
>>        Load  "glx"
>>        Load  "record"
>>        Load  "dbe"
>>        Load  "extmod"
>>        Load  "freetype"
>>        Load  "type1"
>> EndSection
>>
>> Section "InputDevice"
>>        Identifier  "Keyboard0"
>>        Driver      "kbd"
>>        Option       "XkbModel"  "compaqeak8"
>>        Option       "XkbLayout"  "latam"
>> EndSection
>>
>> Section "InputDevice"
>>        Identifier  "Mouse0"
>>        Driver      "mouse"
>>        Option      "Protocol" "auto"
>>        Option      "Device" "/dev/input/mice"
>>        Option      "ZAxisMapping" "4 5 6 7"
>> EndSection
>>
>> Section "Monitor"
>>        #DisplaySize      320   240     # mm
>>        Identifier   "Monitor0"
>>        VendorName   "CPQ"
>>        ModelName    "COMPAQ 7500"
>>  ### Comment all HorizSync and VertRefresh values to use DDC:
>>        HorizSync    30.0 - 70.0
>>        VertRefresh  50.0 - 140.0
>>        Option      "DPMS"
>> EndSection
>>
>> Section "Device"
>>        ### Available Driver options are:-
>>        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>        ### [arg]: arg optional
>>        #Option     "NoAccel"                   # [<bool>]
>>        #Option     "SWcursor"                  # [<bool>]
>>        #Option     "ColorKey"                  # <i>
>>        #Option     "CacheLines"                # <i>
>>        #Option     "Dac6Bit"                   # [<bool>]
>>        #Option     "DRI"                       # [<bool>]
>>        #Option     "NoDDC"                     # [<bool>]
>>        #Option     "ShowCache"                 # [<bool>]
>>        #Option     "XvMCSurfaces"              # <i>
>>        #Option     "PageFlip"                  # [<bool>]
>>        Identifier  "Card0"
>>        Driver      "intel"
>>        VendorName  "Intel Corporation"
>>        BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
>> Device"
>>        BusID       "PCI:0:2:0"
>> EndSection
>>
>> Section "Screen"
>>        Identifier "Screen0"
>>        Device     "Card0"
>>        Monitor    "Monitor0"
>>        DefaultDepth 24
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     1
>>        EndSubSection
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     4
>>        EndSubSection
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     8
>>        EndSubSection
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     15
>>        EndSubSection
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     16
>>        EndSubSection
>>        SubSection "Display"
>>                Viewport   0 0
>>                Depth     24
>>        EndSubSection
>> EndSection
>>
>> ##################################################################################
>> ...
>>
>> no sé, que más tengo que adjuntar???...
>>
>> gracias por su paciencia....Sir's...
>>
>> --
>> -----BEGIN GEEK CODE BLOCK-----
>> Version: 3.12
>> GCS d+ s:-- a-- C+++ UL++++ P L+++ E-- W+ N++ o-- K w--
>> O-- M- V- PS PE- Y PGP++ t 5 X- R+ tv+ b++ DI D--
>> G e h! r++ y-
>> ------END GEEK CODE BLOCK------
>> gnupg id: B35A12C2 @ hkp://subkeys.pgp.net
>>
>> _______________________________________________
>> eSlack mailing list
>> eSlack en lists.eslack.org
>> http://lists.eslack.org/mailman/listinfo/eslack
>>
>
>
>
> --
> Este mensaje no contiene virus, porque ha sido creado con Linux, utilizando
> Software Libre y auditable.
>
> This message doesn't contain viruses, because it has been created with
> Linux, using auditable Free Software.
> _______________________________________________
> eSlack mailing list
> eSlack en lists.eslack.org
> http://lists.eslack.org/mailman/listinfo/eslack
>
>